Baltic Refractory Solution
Baltic Refractory Solution
Refractory insulation materials Refractory plates Insulation wool rolls Wool modules, logs & block products Refractory board and paper Anchors and anchor systems Materials for fireplaces Materials for needs of other industries Refractory adhesives ThermalCeramics Průmyslová keramika Crucibles and graphite cups Usage instructions Technical ceramic and insulators Ceramic shelves and pegs Technical ceramics and isolators Mica insulation materials ISO-Fleks ISO-Therm ISO-TUBE ISO-Cable Tape Heat resistant protective clothing and gloves Refractory concrete Novobet Izobet Flobet Tri-Mor Refractory bricks Refractory cords and tapes Fiberglass cords and tapes Ceramic fiber cords and tapes
BLOK 607 800°C - 1100°C
Blok 607 are plates that are mode from Supwerwool 607 mineral fibers and with a small amount of organic link substance.
Thanks to the big amount of fibers in a plate, Blok 607 are elastic, light, resistant to termo-impact.
All Blok 607 plate types are waterproof to prevent water or binding concrete solution resolving.
Plate thickness larger than 50 mm is acquired by combining two thinner plates.
The maximum continuous use temperature
BOARD 607 900°C - 1100°C
Plates 607 – they are hard panels made from Superwool 607 fiber mixture as well as refractory filling, organic and inorganic link substances.
Plate 607 75: Suitable for all cases with working temperature up to 900°C.
H Plate 607: Recommended in cases when high durability material is necessary.
Plate 607 85: Suitable for all cases with working temperature up to 1000°C.
Plāksne 607 LTI: Recommended to use when thin and hard plates are necessary.
Plāksne 607 INO: Recommended to use when minimal emission discharge is required.
KAOWOOL BOARD 1260°C - 1600°C
Kaowool 1260, Strong, 1400, 1500 and 1600 paltes are made from refractory fiber composition which is specially developed to acquire hard self-sustaining plates with great high-temperature properties.
Plates are made for cases when material harder that rolls are needed. In result, plates have higher density and material has even better insulation properties and diminishes slower.
Kaowool plates are made forming in vacuum. This production strategy gives the opportunity in white color with a small size selection but great precision in thickness. If needed, easy to process.
Strong Board plates are made from selected refractory fill additives to strengthen their mechanic properties. These plates are as twice as durable than 1260 Board plates both before and after firing.
All plates contain a small amount of organic binding substances to increase plate elasticity when working with them before burning. Binding substances burn out in the first burning at about 200°C - 300°C. On request, plates can be delivered already burnt without organic binding substances.
Ways of usage
Ferrous metal: Expanding compounds, heat isolation lining layer, heat lining and metal mold bottom.
Non-ferrous metal: Cap lining in situ machinery and situ gutter lining for copper and copper alloys.
Ceramics: Lining in the hot side of a furnace and at light-material wagon LTM production with low heat capacity.
Glass: Heat-isolation in smelting furnaces and burner protection.
Construction of furnaces: Lining for the hot side of a furnace (alternative to available material available in rolls). Second layer for dense refractory materials and extending compounds.
Light industry: Lining in industrial and home burning chambers.
Petrochemical industry: Lining materials for the hot side in high-temperature heaters.
607 HT plate – hard panels that are made from Supwerwool 607 HT fiber mixture as well as from refractory fill materials and organic and inorganic binding substances.
Superwool 607 HT Board: Standart composition on Superwool 607 HT fiber base.
Superwool 607 HT C Board: Composition specially designed so the material would be used in temperatures up to 1300°C with stable properties when used repeatedly, and high mechanical properties.